BPHQM - CHEVRON UNIVERSAL GEAR LUBRICANT SAE 80W-90
- MSDS: BPHQM
- Manufacturer: CHEVRON ENVIRONMENTAL HEALTH CENTER INC
- Product Name: CHEVRON UNIVERSAL GEAR LUBRICANT SAE 80W-90
- National Stock Number: 9150-01-035-5394
Product Identification
Product ID:CHEVRON UNIVERSAL GEAR LUBRICANT SAE 80W-90
MSDS Date:03/25/1987
FSC:9150
NIIN:01-035-5394
MSDS Number: BPHQM
Responsible Party
RICHMOND, CA 94804-0054
US
Emergency Phone: 415-233-3737
Info Phone: 415-233-3737
Cage: 0AHD1
Contractor
Telephone: 800-582-3835
Cage: 0AHD1
Ingredients
HIGHLY REFINED BASE OIL ( CAS # 64742-65-0 OR 64742-85-9,
CAS: 64742-54-7
RTECS: PY8035500
Fraction By Weight: >90%
ADDITIVES INCLUDING INHIBITORS,EXTREME PRESSURE AGENTS &/OR
CAS: 9003-27-4
Fraction By Weight: <10%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN:NONE EXPECTED FOR SINGLE
SHORT-TERM EXPOSURES. PROLONGED OR REPEATED CONTACT MAY PRODUCE
SOME IRRITATION. EYE: NO SIGNIFICANT IRRITATION EXPECTED.
INGEST:RELATIVELY NON-TOXIC. INHAL:NONE EXPECTED UNDER NORMAL
CONDITIONS OF USE.
Effects of Overexposure:EYE IRRITATION
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE:FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES.
SKIN:WASH WITH SOAP AND WATER. INHAL:MOVE TO FRESH AIR. SUPPORT
BREATHING (GIVE O2/ARTF RESP). INGEST:IF A LARGE AMOUNT IS
SWALLOWED, SEEK MEDIC AL HELP IMMEDIATELY.
Fire Fighting
Flash Point Method:COC
Flash Point:>392F,>200C
Extinguishing Media:AGENTS APPROVED FOR CLASS B HAZARDS (E.G., DRY
CHEMICAL, CARBON DIOXIDE, HALOGENATED AGENTS, FOAM, STEAM) OR WATER
FOG.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR PROTECTIVE CLOTHING
AND SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY CAUSE
PRODUCTION OF HAZARDOUS DECOMPOSITION PRODUCTS.
Accidental Release
Spill Release Procedures:TREAT AS AN OIL SPILL. CONTAIN AND REMOVE BY
MECHANICAL MEANS OR ABSORB IN INERT ABSORBENTS AND SAVE IN
CONTAINERS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID STRONG OXIDIZERS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE REQUIRED FOR NORMAL CONDITIONS OF USE. IF
GENERATING MIST, USE SCBA.
Ventilation:GENERAL
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:V6
Spec Gravity:0.90 (WATER=1)
Solubility in Water:NEGLIGIBLE (<0.1%)
Appearance and Odor:DARK FREEN LIQUID
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:OXIDES OF CARBON, SULFUR, DENSE SMOKE.
Disposal
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH APPLICABLE
FEDERAL, STATE, OR LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.